Approved rate list for solar panel testing are as follows:
| S.No | Names of Test | Per piece prices | ||||
| 1-5 | 6-25 | 26-99 | 100-500 | >500 | ||
| 1. | Electroluminescence Imaging with analysis | 3,00 | 2,500 | 2,000 | 1,000 | 650 |
| 2. | Real Power at Standard Testing Conditions | 18,000 | 12,000 | 10,000 | 7,500 | 7,500 |
| 3. | Real Power Measurements under low Irradiance @ 200W | 9,000 | 8,000 | 7,500 | 7,000 | 7,000 |
| 4. | Wet Leakage Test | 15,000 | 13,000 | 10,000 | 8,000 | 8,000 |
| 5. | Dry insulation Test | 8,000 | 7,000 | 6,000 | 5,000 | 4,000 |
| 6. | Real Power measurement and comparison after preconditioning (Light Induced degradation) | 20,000 | 18,000 | 15,000 | 12,500 | 12,500 |
| 7. | Peel-Off Test | 28,000 | 25,000 | 20,000 | - | - |
| 8. | Potential Induced Degradation @ 1,000 V | 45,000 | 40,000 | 35,000 | - | - |
| 9. | Hot Spot Test (4 shading levels) | 40,000 | 35,000 | 30,000 | - | - |
| 10. | EVA Encapsulant cross-linking (2 samples) | 30,000 | 28,000 | 25,000 | - | - |
| 11. | Thermal Imaging | 7,000 | 6,000 | 5,000 | - | - |
| 12. | Bypass Thermal Diode Test | 13,500 | 12,000 | 10,000 | - | - |
| 13. | Ground Continuity Test | 2,000 | 1,500 | 1,000 | - | - |
| 14. | Impact Test (Module Breakage Test) | 13,000 | 12,000 | 10,000 | - | - |
| 15. | UV Preconditioning Test | 44,000 | 38,000 | 30,000 | - | - |
| 16. | Impulse Voltage Test | 6,600 | 6,000 | 5,000 | - | - |
| 17. | Reverse Current Overload Test | 6,600 | 6,000 | 5,000 | - | - |
| 18. | Mechanical Load Test | 50,000 | 45,000 | 40,000 | - | - |
| 19. | Hail Impact Test | 35,000 | 32,000 | 30,000 | - | - |
| 20. | Polarity Test | 1,000 | 900 | 800 | - | - |